No. 9691 – "Y" Manifold

• Extremely useful when connecting two hydraulic cylinders to a single line.Has three 3/8" NPTF ports.
• Has three 3/8" NPTF ports.
• Wt. 0.45 kg.

No. 9635 – Manifold block

• This hex-shaped manifold offers extra versatility with six 3/8" NPTF ports and two 1/4" mounting holes.
• HWt. 0.9 kg.

No. 9648 – Manifold block

• This 178 mm long manifold block has seven 3/8" NPTF ports and two 6.4 mm mounting holes.
• Wt.1.2 kg.

No. 9626 – Pump mounted manifold block

• Converts pumps with pump-mounted valves for use with remote-mounted valves. This manifold block is a subplate mounted on the pump cover plate and provides 3/8" NPTF pressure and return ports. Maximum recommended flow rate is 19 l/min.
• Note: If used on PE30 or PG30 series pump, 12.7mm longer mounting screws are required. Order four (4)
• No. 11956 screws separately.

9642 and 9644 manifold blocks with needle valves

• For independent multiple-cylinder operation, feature needle valves for precise manual control. Designed for remote-mounted applications. Can be used with all Power Team pumps.

No. 9634 – Manifold block

• This manifold is for multiple-cylinder installations, has four 3/8" NPTF ports and two 1/4" mounting holes.
• Wt. 0.7 kg.

No. 9617 – Manifold block

• When a multiple-cylinder installation is required, this manifold is invaluable.
• Has six 3/8" NPTF ports to handle larger multiple-cylinder systems.
• Wt. 1.4 kg.

No. 9627 – Manifold block

• This 406.4 mm long manifold block allows you to mount the 9575 or 9596 valves without interference. Has seven 3/8" NPTF ports and two 6.4 mm mounting holes. Wt. 2.7 kg.

9642 and 9644 manifold blocks with needle valves

• For independent multiple-cylinder operation, feature needle valves for precise manual control. Designed for remote-mounted applications. Can be used with all Power Team pumps.